Cookie Img
Call Us+8615315168119
Home » Products » Deep Processing Silicone Products » DY-ETA201 Antifoam Emulsion

DY-ETA201 Antifoam Emulsion

DY-ETA201 Antifoam Emulsion
DY-ETA201 Antifoam Emulsion
Send Inquiry
Product Code : DY-ETA201 Antifoam Emulsion
Price And Quantity
  • Unit of Measure
  • ,
Product Description

DY-ETA201 Antifoam Emulsion

Silicone emulsion for prevention of foam in aqueous and nonaqueous system


DESCRIPTION

DY-ETA201 Antifoam Emulsion is a silicone foam control agent that is 100 percent active. Effective in both aqueous and nonaqueous systems, it can be used in concentrations as low as 10 parts of active silicone per million parts foamer to eliminate most foams.


FEATURES

Non-toxic

Odorless

Economical

Easy to use, no need emulsifying

Effective in low concentrations

Effective over wide temperature range

Immediate foam knockdown

Antifoaming in aqueous and nonaqueous systems

Long term foam inhibition


TYPICAL PROPERTIES

Appearance

Pale yellow cream

Valid Content (%)

100

PH

6~8


APPLICATIONS

DY-ETA201 Antifoam Emulsion gives excellent performance in a wide range of applications. Typical uses include:

1. Defoaming of foams in oil phase system, such as foams produced in leatherette manufacturing, the fabricating and processing of oils, paints, and lubrication fluids, mixing and agitating of organic materials.

2. Defoaming of foams in aqueous system, such as foams produced in the following processes:

Printing and dyeing

Washing

Paper pulp

Water treatment

Biological fermentation

Metal detergent

Cutting oil

Low foam or non-foam powdered detergent


HOW TO USE

To produce optimal foam control, it is necessary to have the antifoam completely dispersed with water or a suitable solvent in the foaming medium prior to use. Follow these steps to achieve complete dispersion:

1. Add equal volume of antifoam to the solvent and mix until uniform.

2. Then add again equal volume of antifoam to the predispersed formulation and mix thoroughly.

3. Repeat the above processes until final 5% diluted formulation achieved.

4. Add the final dispersed formulation to the foam system and agitate until foams eliminated.

5. The suggested use level is 10 ppm of DY-M1011 Antifoam Emulsion in the foam system.


PRODUCT SAFETY INFORMATION

Directly adding of non-dispersed antifoam to the foam system is not allowable.


STORAGE

This product should be stored in original, unopened containers at room temperature. Environmental temperature should not be below 0℃.


PACKAGING

This product is available in polyethylene plastic pails of 5, 10, 25, and 50 kg.


SHIPPING

Ship the product as non-dangerous good.


LIMITATIONS

The information contained herein is in accordance with the present state of our knowledge and is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for the intended end use. The information provided by us does not absolve the user from the obligation of investigating the possibility of infringement of any patent.


Our sole warranty is that our products will meet the sales specifications in effect at the time of shipment.


DISCLAIMER

TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, DAYI SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR SUITABILITY FOR A PARTICULAR PURPOSE OF THE PRODUCT. DAYI DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.



SHANDONG DAYI CHEMICAL CO.,LTD
X