
DY-N3231 Polyurethane Elastomer Release Agent
DESCRIPTION
DY-N3231 Polyurethane Elastomer Release Agent is a modified siloxane specially designed for mold release of polyurethane products.
FEATURES
Cost effective
Excellent mold coverage (good wetting and spreading)
No excessive cleaning required before finishing molded parts
No build-up on molds
Good smoothness and release
High and low temperature stability
No-corrosion
TYPICAL PROPERTIES
Appearance | Pale yellow transparent liquid |
Viscosity (25℃,mpa.s) | 100~1000 |
PH | 7~9 |
Release Force (N/100cm²) | ≤150 |
APPLICATIONS
DY-N3231 has been specially formulated as a semi-permanent release agent in a wide range of applications, typical applications includes:
1. Polyurethane release: particularly polyurethane cast elastomers.
2. Other applications in release of rubber and resin parts.
HOW TO USE
Use dichloromethane (or toluene, xylene, petroleum, 120# solvent) to dilute the release agent. Spray or brush the solution to the mold surface uniformly.
Substrate, mould size, ambient temperature, technical requirement, process conditions, application method all contribute significantly to the use level of the release agent. Advisable use level is 1 part release agent diluted in 30 to 40 parts of water. Users are recommended to determine optimum concentration and application method on a small test sample before use in production.
PRODUCT SAFETY INFORMATION
Avoid contact with acids or bases.
STORAGE
1. Store in original, unopened container at room temperature.
2. Keep in a well-ventilated place.
PACKAGING
This product is available in plastic pails of 5-50 kg.
SHIPPING
Ship this product as non-dangerous good.
LIMITATIONS
The information contained herein is in accordance with the present state of our knowledge and is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for the intended end use. The information provided by us does not absolve the user from the obligation of investigating the possibility of infringement of any patent.
Our sole warranty is that our products will meet the sales specifications in effect at the time of shipment.
DISCLAIMER
TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, DAYI SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR SUITABILITY FOR A PARTICULAR PURPOSE OF THE PRODUCT. DAYI DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
![]() |
SHANDONG DAYI CHEMICAL CO.,LTD
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |