N322 Amino silicone oil

Next > >

<< Previous

Send Inquiry

Product Code : N322 Amino silicone oil

Price And Quantity

Minimum Order Quantity
200
Unit of Measure
Kilograms/Kilograms,

Price Range
3100.00 - 5000.00 USD ($)

Product Description

- DY-201 Dimethyl silicone oil, chemical name is Polydimethylsiloxane, which formula is (CH₃)₃SiO[(CH₃)₂SiO]_n-Si(CH3)₃, this products is a kind of transparent, colourless polydimethylsilixane liquid, available viscosities ranging from 10cps to 5000000cps.

Features

1) Little change in physical properties over a wide temperature span - arelatively flat viscosity-temperature slope, and serviceability from -50°C up to 200°C.

2) Excellent water repellency.

3) Good dielectic properties over a wide range of temperatures and frequencies.

4) Low surface tension - readily wets clean surfaces to impart water repellency and release characteristics.

5) Viscosities above 10 mm²/s also exhibit heat stability, oxidation resistance, very low vapour pressures, and high flash point.

6) Low order of toxicity

7) Essentially odourless

8) Soluble in a wide range of solvent

9) Non-greasy and non-rancidifying

Specification

Items index	201-10	201-50	201-100	201-350	201-500	201-1000
Viscosity(25 °C)mpa.s	10-15	50±5	100±5	350±20	500±50	1000±80
Flash point ≥°C)	160	260	290	290	290	290
Specific gravity(25°C)g/cm³	0.930-0.940	0.955-0.965	0.960-0.970	0.962-0.972	0.965-0.975	0.967-0.975
Volatile content(≤150 ℃,2h)	1.5	1.5	1.5	1.5	1.5	1.5

Application

RELEASE MATERIAL: Used alone or as part of a compounded formula,

DY-201 Silicone fluid provides a non-carbonising mould release for rubber, plastics, and metal die castings.

FOAM PREVENTITIVE: Extremely small amounts of the fluid effectively control foam in many processing operations, especially in non-aqueous systems.

MECHANICALFLUID:Excellent viscosity-temperature characteristics,

thermal and chemical stability, shear-breakdown resistance, compressibility, and rubber compatibility make DY-201 Fluid outstanding for mechanical/ hydraulic uses. Typical uses include hydrolic stabilisers, damping media.

• SURFACE-ACTIVE MATERIAL: Added to vinyl plastisols,

DY-201 Silicone fluid improves the flow characteristics, de-aerates and

lubricates the surface of the completed part.

• LUBRICANT: The fluid provides excellent lubrication for most plastic and elastomeric surfaces. Lubricity with metals depends upon the combination involved. Care should be taken to select suitable metals for pumps and other items with moving parts.

• COSMETICS AND SKIN PREPARATIONS: DY-201 Fluid is an important ingredient in hand creams, skin protectants, suntan lotions, and hair grooming aids because it forms a non-greasy, protective film which resists water and waterborne irritants, yet allows the skin to breathe. Literature is available that details the use of the fluid in cosmetics.

• POLISHES AND CHEMICAL SPECIALITIES: DY-201 Fluid is used in most automobile and furniture polishes for its ease of application,high gloss with minimum rubbing, and a durable water-repel-lant film. It is also used in many other specialty formulations, including aerosol starches and fabric conditioners. Additional literature is available.

• ELECTRICAL/ELECTRONIC EQUIPMENT: With excellent dielectric

properties, DY-201 Fluid can be used for both insulating and

damping applications.

• LUBRICATE FOR MDEDICAL, FOOD,CHEMICAL, COATING AND INDUSTIAL TRADE.

Trade Information